NETGEAR EX3800 AC750 WiFi Extender Setup

Another minimal costing Wi-Fi extender that attaches specifically into a divider attachment is the NETGEAR EX3800. It’s double band and perfect with Remote AC innovation (the most recent standard). This Netgear extender offers throughput of up to 750Mbps.

The EX3800 highlights two outer radio wires for improved Wi-Fi scope, and additionally the alternative to make another Wi-Fi get to point or hotspot through a wired Gigabit Ethernet port. This is perfect on the off chance that you need to make a different system for visitors. NETGEAR likewise incorporates its Wi-Fi Investigation Application, which enables you to Gage the quality of your Wi-Fi flag, keep an eye on its status or distinguish swarmed channels.

In any case, for 5GHz, the inverse was valid. It jumped to 61.9Mbps, additionally demonstrating the point about a high most extreme speed yet shorter range. Everything considered, finding the correct sweet spot to put the extender will unmistakably be an instance of experimentation, however in the event that you utilize the 5GHz band only, it’s an easy decision. The EX3800 is an awesome alternative for those hoping to extend their Wi-Fi to those difficult to-achieve places. It’s anything but difficult to setup, conveys better than average Wi-Fi speeds and has a helpful determination of highlights.

netgear ex3800

Troubleshooting Netgear EX3800 Setup Issues

Go through the below-mentioned troubleshooting steps to fix Netgear EX3800 setup issues:

  • Make sure that the extender is receiving proper power supply from the wall outlet.
  • Confirm that the wall plug in which the extender is plugged in is not damaged or short-circuited.
  • Access high-speed internet connection on your device.
  • Check all the wired connections. Do not use any damaged cable.
  • Keep your extender away from walls, room corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, metal objects, aluminum studs, etc.
  • If you are getting issues with mywifiext.net, be certain that you entered the correct URL in the address bar.
  • Power-cycle your Netgear extender once and try to set it up again.
  • Use only the latest version of web browser during mywifiext.net login.
  • Update the latest Netgear firmware version on your extender.
  • Reset the extender to its factory default settings.
EX6300
None of the aforementioned troubleshooting tips resolve your issues? Don’t panic. Just give us a call at 1-855-844-0144 and fix your extender setup issues.

Netgear EX3800 Setup Using WPS Push Button

To set up your Nighthawk WiFi Extender using WPS:

  • Power on the extender.
  • Place the extender and WiFi router in the same room.
  • Once done, plug your extender into an electrical outlet.
  • Wait for the Power LED on EX3800 to light green.
  • Press the WPS button on the extender.
  • Now, press the WPS button on your WiFi router.
  • If the Netgear EX3800 Link Status LED lights white, the connection between your router and extender is good.

Note: If your router supports the 5 GHz band, your extender attempts to connect to the router’s 5 GHz band the first time you press the WPS button. If your extender did not connect to the router’s 5 GHz band the first time, it may result in a lot of issues during extender setup. To resolve such issues at the earliest, give us a call at toll-free 1-855-844-0144.

  • Move your extender to a new location that is about halfway between your router and the area with a poor router WiFi signal.
  • Take your WiFi-enabled computer or mobile device to the location with poor WiFi router coverage.
  • Connect your WiFi-enabled computer or mobile device to the extended network. Your extender uses the same WiFi network settings as your router for its 2.4 GHz and 5 GHz extended networks.

That’s how you can complete your Netgear EX3800 Setup using WPS button. If you come across any type of technical issue during the setup process, feel free to contact the experts at 1-855-844-0144.

Common Issues During Netgear EX3800 Setup

  • Mywifiext.com doesn’t open
  • Mywifiext.net not working
  • Incorrect mywifiext password
  • WiFi extender is connected but no internet
  • Can’t connect to mywifiext.local
  • WiFi extender is not connected to the network
  • Netgear genie app doesn’t open
  • Issues while accessing 192.168.1.250 IP address
  • Can’t find Netgear range extender network name
  • Netgear Extender not working
  • Nighthawk EX3800 – no internet
  • Netgear extender red light causing issues
  • Unable to perform Netgear extender reset
  • Internet connected but not working
  • Lost configuration CD
  • WiFi connectivity issues
  • Netgear genie smart setup page continues to appear even after Netgear extender setup
  • Forgot Netgear extender default password
  • Extender’s LED lights are not stable
  • Can’t login to Netgear EX3800 extender
  • EX3800 drops internet connectivity
  • Unable to update Netgear firmware
  • Can’t access mywifiext.net after update on EX3800
  • MAC address filtering errors
  • Nighthawk EX3800 not working failed update
  • WiFi extender not connecting to internet
Fix all such issues within minimal time by calling the experts at toll-free 1-855-844-0144.

How to Configure FastLane Technology on Netgear EX3800 Extender

FastLane Technology provides you with maximum WiFi performance. Basically, it offers high-speed WiFi connection with a dedicated band connecting the WiFi router to your EX3800 extender and a second band connecting the WiFi device and extender. Please follow these steps to configure FastLane Technology on your Netgear Extender:

  • Connect your client device to the extender.
  • After that, open any web browser such as Microsoft Edge, Google Chrome or Internet Explorer.
  • Type mywifiext.net in the address bar and press Enter key.
  • Enter the username and password when the login window appears.
  • On the Netgear Genie page, click on ‘Do More’ and then on ‘FastLane’ option.
  • Now, you will get two options: ‘Device-to-extender in 2.4 GHz only and extender-to-router in 5 GHz only’ and ‘Device-to-extender in 5 GHz only and extender-to-router in 2.4 Ghz’.
  • Select any option you like and click on the Save button.

ex3700

In case you stuck at any step while enabling the FastLane Technology on your extender, don’t hesitate to contact the experts at 1-855-844-0144 for on-the-spot solution.

How to Update Firmware on Netgear Extender?

Does your WiFi extender, all of sudden, start behaving weirdly? Is it not providing the required speed even after a successful Netgear WiFi extender setup? If yes, then update firmware on Netgear extender right away.Netgear Extender Firmware is a set of instructions integrated into the hardware device. Talking in a layman’s language, Netgear extender firmware is basically an operating system specifically intended to run on your particular make and model number of extender.So make sure to have the latest firmware version on your extender. Here’s how to upgrade the firmware on your Netgear range extender:z

  • First and foremost, turn on your WiFi extender.
  • Connect a PC, laptop or mobile device to the extender’s network.
  • Once done, open a web browser as per your choice.
  • Enter mywifiext.net in the address bar and press enter key.
  • Log in to your extender using the username and password.
  • Go to the settings menu and click on Firmware Upgrade option.
  • Thereafter, click on Check button.
  • If there is any new firmware version available, click on yes button for firmware upgrade.
  • Now, wait for some time and let the Netgear extender firmware update properly.
That’s it! Your extender’s firmware has been updated. In the case of any difficulty, feel free to contact the experts at 1-855-844-0144 (24×7 Helpline).

EX3800 Extender Technical Specification

Wifi Tech and Range AC1200 Dual Band Range
WiFi Technology 802.11ac
WiFi Permormance AC750 (300 Mbps+450 Mbps)†
WiFi Band 2.4GHz and 5GHz
Key Features
  • Dual band WiFi up to 750Mbps
  • Supports new 802.11ac & b/g/n WiFi devices
  • Convenient wall-plug design with extra noise-filtered power outlet
  • Works with any WiFi router